Paper Cups · Lids & Sleeves

Disposable Cup Lids and Printed Cup Sleeves

Two clear cold cups with dark printed sleeves on a sandstone block
Lids & Sleeves

GPP supplies paper and fiber cup lids matched to the rim of every cup we print, plus custom printed cup sleeves in kraft or white board. Lids come in 62, 73, 80 and 90 mm. Printed sleeves typically start from 5,000 pieces and can change with each promotion while your cups stay the same.

Spec sheet

Lids & Sleeves at a glance

Hand holding a teal lidded paper coffee cup with an orange and white circular logo and a gold geometric band, against a soft clay wall
Lid sizes
62, 73, 80 and 90 mm rims
Lid types
Sip lids, flat lids with straw slot, espresso lids
Lid material
Paperboard and molded fiber
Sleeves
Kraft or white board, flat or embossed
Sleeve MOQ
Typically from 5,000 printed sleeves
Lead time
Delivery in 1–2 weeks after proof approval

Lid and sleeve sizes

Lids fit by rim diameter, not by cup capacity. Use this table to match lids and sleeves to the cups in our range.

Cup lid and sleeve fit guide (typical)
ItemFitsRim ØMaterialNotes
Espresso lid4oz cups62 mmPaperboard or fiberSmall sip opening
Tea lid6.5oz cups73 mmPaperboard or fiberSip opening
Sip lid8oz cups80 mmMolded fiberDrink-through opening
Sip lid12oz and 16oz cups90 mmMolded fiberOne lid for both sizes
Flat lid with straw slot12–22oz cold cups90 mmPaperboardFor iced drinks and juice
Cup sleeve8oz cupsn/aKraft or white boardFlat or embossed
Cup sleeve12oz and 16oz cupsn/aKraft or white boardOne sleeve fits both
Tea glass with a printed cream and terracotta paper sleeve and a palm-shaped Arabic message topper on a travertine block against a sage wall

Why lid fit matters

A lid that is half a millimeter off will pop off in a delivery bag or leak when a customer tilts the cup. Lids clip over the rolled rim of the cup, so the rim diameter and the shape of the rim roll both need to match.

Buying cups and lids from the same supplier removes that risk. We match every lid we supply to the rim of the cups we print, and you can test a sample pack before your first run. Planning your sizes around rim diameter also cuts stock: our 12oz and 16oz cups share a 90 mm lid. If you already hold cups from another supplier, send us a few and we will check which of our lids fit before you order.

Lid options

  • Molded fiber sip lids

    Made from plant fiber pressed into shape, these lids replace plastic sip lids for coffee and tea. They feel firm and slightly textured.

  • Paperboard lids

    Folded or pressed paperboard lids work for espresso, tea and cold drinks with a straw. They stack flat and take up little storage.

  • Flat lids with a straw slot

    For iced coffee, juice and smoothies in cold cups. Check the straw diameter against the slot before ordering.

Teal paper coffee cup with a matching lid lifted off, on a grey stone slab
Cream paper cup holder with a printed coconut illustration

Printed cup sleeves

  • When a sleeve beats a double-wall cup

    A sleeve over a single-wall cup costs less per serve in many cases and lets you change artwork for Ramadan, National Day or a new drink without reprinting your cups.

  • Kraft or white

    Kraft sleeves look natural and suit one- or two-color print. White sleeves give brighter color and full-color artwork.

  • Flat or embossed

    A flat sleeve prints cleanly. An embossed or textured sleeve adds grip and a little more insulation.

  • Space for a message

    Sleeves are a good place for a QR code, a loyalty offer or a seasonal message, since customers look at them while they hold the cup.

Sustainability note

Cup lids and the UAE plastic ban

Single-use plastic lids are among the items covered by the second phase of the federal plastic ban from 1 January 2026. Paper and molded fiber lids are the common replacement. Some details, including exemptions and emirate-level timelines, are still being clarified, so check current MOCCAE and emirate guidance before you clear old plastic lid stock.

Paper Cups

Compare other paper cups

Lids & Sleeves is one of 5 paper cups we print. Swipe to compare.

FAQ

Lids & Sleeves: your questions

Are plastic cup lids banned in the UAE?

Single-use plastic lids fall under the federal plastic ban's second phase from 1 January 2026. Paper and fiber lids are the usual replacement. Check current MOCCAE and emirate guidance for exemptions and timelines.

Do 12oz and 16oz cups use the same lid?

In our range, yes. Both have a 90 mm rim, so one sip lid fits both. The 8oz cup takes an 80 mm lid and the 4oz espresso cup takes a 62 mm lid.

What is a cup sleeve for?

A sleeve wraps around a single-wall cup to protect the customer's hand from heat. It also gives you an extra print area for branding or promotions.

What is the minimum order for printed cup sleeves?

Printed sleeves typically start from 5,000 pieces per design, with delivery in 1–2 weeks after proof approval.

Can I order paper cups with lids together?

Yes. Order printed cups and matching lids in one quote and we'll confirm the fit before production.

Do fiber lids change the taste of the drink?

Good-quality molded fiber lids are made for food contact and don't affect the taste of coffee or tea. They feel different on the lips from plastic, so try a sample with your own drinks before switching.

Ready to print
lids & sleeves?

Send your logo or artwork with the size and quantity. We'll come back with board options, a dieline and a clear quote for your lids & sleeves.