The short answer
The price of a paper cup in the UAE depends on six things: size, wall type, board weight, number of print colors, order quantity and whether lids and delivery are included. Quantity has the biggest effect on printed cups, because plate and setup costs are spread across the run, so the price per cup falls as the order grows.
Paper cup price in UAE is the most searched cup question we see in Google's suggestions, and it is a fair one. This post will not give you a single number, because any honest number depends on your spec. What it will do is show you what you are paying for, how much each choice moves the cost relative to the others, and how to compare two quotes properly.
What you are paying for in a printed cup
Paperboard is the largest material cost. A cup is made from food-grade board with a barrier coating, and heavier board or a premium coating costs more per cup. The second cost is printing: plates for each color, press setup, ink and the sheets used to bring color into register before good sheets start. The third is conversion: die-cutting the printed sheets into fans, forming them into cups on a cup machine, then counting, sleeving and boxing.
On top of that sit lids, sleeves or carriers if you order them, cartons, delivery and 5% VAT. Plain stock cups skip the printing setup entirely, which is why they look cheap next to a custom quote at low quantities.
The cost drivers and how much they move the price
Directions and rough sizes of effect based on how cups are typically priced in the industry. Your quote will reflect your exact spec.
| Driver | Effect on price per cup | How to keep it in check |
|---|---|---|
| Order quantity | Largest effect: setup cost is spread across more cups | Order fewer sizes in larger runs |
| Cup size | Bigger cups use more board and cost more | Match sizes to what you actually sell |
| Wall type | Double wall typically 1.5 to 2 times single wall; ripple higher | Use double wall where heat matters, single elsewhere |
| Board weight and coating | Heavier board and alternative coatings cost more | Use the lightest board that passes your hold test |
| Print colors | Each color adds a plate and setup time | One or two strong colors often look better anyway |
| Special finishes | Foil, embossing or soft-touch add steps | Keep finishes for the cup size that sells most |
| Lids and sleeves | Separate items, priced separately | Ask for the lid price on the same quote |
| Delivery and packing | Carton count and drop points affect cost | Fewer, larger deliveries cost less per cup |
Relative cost by size and wall type
A typical industry index, with a plain 8oz single-wall cup at 100. Use it to compare options, not as a price list.
| Size | Single wall | Double wall | Ripple wall |
|---|---|---|---|
| 4oz | 60 to 70 | 100 to 120 | Rarely made |
| 8oz | 100 | 150 to 190 | 170 to 210 |
| 12oz | 120 to 135 | 180 to 230 | 200 to 250 |
| 16oz | 140 to 160 | 210 to 270 | 230 to 290 |

Why quantity matters so much: a worked example
Printing has a fixed cost that does not change with quantity: plates, setting up the press, makeready sheets and setting up the die-cutter and cup machine. Everything after that is a running cost per cup. To show how this plays out, take a simple illustration in made-up cost units rather than dirhams: a fixed setup of 1,000 units and a running cost of 0.10 units per cup.
At 5,000 cups, setup adds 0.20 per cup, so each cup costs 0.30. At 10,000 cups it costs 0.20. At 25,000 it costs 0.14, at 50,000 it costs 0.12, and at 100,000 it costs 0.11. The first doublings save a lot; later ones save less. That curve is why printers set minimum quantities, and why splitting the same total across five sizes costs noticeably more than ordering three.
The quantity curve in numbers
Illustrative figures in cost units, using the example above. Real setup and running costs vary by job.
| Cups ordered | Setup share per cup | Running cost per cup | Total per cup |
|---|---|---|---|
| 5,000 | 0.20 | 0.10 | 0.30 |
| 10,000 | 0.10 | 0.10 | 0.20 |
| 25,000 | 0.04 | 0.10 | 0.14 |
| 50,000 | 0.02 | 0.10 | 0.12 |
| 100,000 | 0.01 | 0.10 | 0.11 |


Plain, stock-printed and custom-printed cups
Plain cups carry no print cost and are available from stock, so they win on price for very small quantities. Stock-printed cups carry a generic design such as a coffee bean pattern; they cost a little more than plain and say nothing about your brand. Custom-printed cups carry your artwork and need a minimum run, but above that minimum the gap to plain cups narrows quickly.
For most cafés the decision comes down to volume. If you sell a few hundred hot drinks a day, a printed run pays for itself in brand presence within months. If you sell a few dozen, start with one printed size, your best seller, and use plain cups for the rest.
Imported or printed in the UAE?
Imported cups can look cheaper per unit, especially at container quantities. Add sea freight, customs duty, clearance, the cash tied up in stock that arrives in one go, and a lead time measured in months, and the gap often shrinks. Color approval is harder at a distance, and a mistake costs a full production cycle to fix.
Printing locally means smaller, more frequent runs, faster reorders, and the option to visit the press or see a physical proof before production. For a café group that changes cup designs seasonally, the shorter cycle is usually worth more than a small difference in unit price.
How to compare two quotes fairly
Check the board
Compare board weight in gsm for the inner cup and, for double wall, the outer wall. A lighter board is cheaper and flimsier.
Check the coating
PE, PLA and water-based barriers are priced differently. Make sure both quotes use the same one.
Check the print
Number of colors, print method and any finishes should match. Ask whether plates are included or charged separately.
Check what is included
Lids, sleeves, delivery, cartons and VAT. A cheaper cup with an expensive separate lid may cost more overall.
Check lead time and reorder terms
A good price with a long lead time can force you to hold more stock.
Ask for samples
Test both suppliers' cups with your hottest drink and your lids before deciding.
Getting a quote from GPP
We quote printed cups per size, with lids and carriers as separate lines so you can see each cost. To quote accurately we need the sizes, wall type, quantity per size, number of colors or your artwork, delivery location in the UAE and whether you need lids. If you are unsure about the spec, tell us your drinks and volumes and we will suggest one, then send samples.
Products in this guide
GPP Production Team
Print & packaging specialists, Ajman
Written by the people who run our presses and finishing lines in Ajman, and checked against current UAE rules where regulation is involved. Published 15 Sept 2026; last reviewed 10 Oct 2026.







